Android v244 - D90 ok, D7000 fail

General discussions, bugs, support, suggestions

Android v244 - D90 ok, D7000 fail

Unread postby Didix » 16.06.2012 16:55

Hi there

Accidentially I stumpled over the Android app and was quite excited - the piece of software I was waiting for :-)
I have it running on a Asus Transformer and it behaves fine with a Nikon D90.
As soon as I get I get my USB connector (Samsung Galaxy S2 - Nikon D90/D7000) I will try it on the S2.
If this runs together with my D7000, this will be my favorite field gadget for that summer :)

I already made a couple of nice stacks with the D90.

However, now I tried it on my D7000, which is actually my 'production' camera.
Unfortunately this does not work in a useful manner.
It recognizes my D7000, brings up the liveview and autofocuses - so far so good.

I push the Arrow Keys and nothing happens.

I have included the log file.

Thanx for supporting!

-Didix

EDIT: Hmm, I am not able to upload the logfile ..
So I'm posting it here - don't blame me :?

EDIT2: the D7000 allows MirrorLockUp - would be nice to include that in Helicon Remote ..

-------
Code: Select all
 HELICON_REMOTE_LOG_START_MAGIC_DUST

 Stopping GPS
 Shutter speed control: enable =  0
 Java code message:  Android version: 18, core version: 2.4.4
 Java code message:  Device: asus Transformer TF101G
 Java code message:  Android platform version: 13
 Java code message:  043c704942ff8457
 Java code message:  Running processes:
 Java code message:  .HeliconRemoteActivity
 Java code message:  com.android.launcher2.Launcher
 Java code message:  .Settings
 Java code message:  com.asus.filemanager2.activity.FileManagerActivity
 Java code message:  Dangerous process - killing: com.android.gallery3d.app.Gallery
 Java code message:  Process com.google.android.gallery3d killed successfully
 Java code message:  Creating Activity
 Java code message:  Service created
 Java code message:  Starting service
 Java code message:  Activity is stopped
 Java code message:  Found new device: VID = 4b0, PID = 428
 Java code message:  Found new device: VID = 4b0, PID = 428
 Java code message:  permission granted for device VID = 4b0, PID = 428
 Java code message:  Found new device: VID = 4b0, PID = 428
 open
 requestDeviceInfo
 exec
 open : trying to open ptp device. vendor = 0 , product = 0
 open : OK
 deviceOpened
 Shutter speed control: enable =  0
 openSession
 openSession : trying to open session
 openSession : successfully opened. Vendor = 0 , product = 0
 onAeModeChanged
 updateBracketingData . curTv= -1 , curIso= -1
 onApertureChanged
 updateBracketingData . curTv= -1 , curIso= -1
 onShSpeedChanged
 updateLongest
 updateBracketingData . curTv= 39 , curIso= -1
 onIsoChanged
 updateLongest
 updateBracketingData . curTv= 39 , curIso= 0
 propChanged :  D7000 : AEMode:  Manual  (id =  1 )
 propChanged :  D7000 : ImageQuality:  JPEG Fine Large (4928x3264) ( id =  2 )
 Shutter speed control: enable =  1
 Storage info unpacked for storage ID 10001
 Type: 0x         4
Capacity: 30424 MB
Free space: 30403 MB
Free space in images: 2191
Description: NIKON D7000 [Slot 1]
 Storage info unpacked for storage ID 20001
 Type: 0x         4
Capacity: 30424 MB
Free space: 30424 MB
Free space in images: 2192
Description: NIKON D7000 [Slot 2]
 propChanged :  D7000 : battery level:  100
 Shutter speed control: enable =  1
 "Switch LV State" button pressed
 exec : begin running program ' start liveView program ', serial =  2
 CCameraProgram: cmdSelCamera
 CCameraProgram: cmdStartLV
 CCameraProgram: runCmdStartLiveView()
 transactionComplete : ptpTransaction returned error 2019  for operation 90c8
 transactionComplete : ptpTransaction returned error 2019  for operation 90c8
 transactionComplete : ptpTransaction returned error 2019  for operation 90c8
 transactionComplete : ptpTransaction returned error 2019  for operation 90c8
 transactionComplete : ptpTransaction returned error 2019  for operation 90c8
 CCameraProgram: cmdStartLV
 CCameraProgram: cmdPause
 CCameraProgram: cmdPause
 CCameraProgram: cmdPause
 exec : finishing executing program ' start liveView program ', serial =  2
 onApertureChanged
 updateBracketingData . curTv= 39 , curIso= 0
 Shutter speed control: enable =  1
 exec : begin running program ' program #3 ', serial =  3
 CCameraProgram: cmdSelCamera
 CCameraProgram: cmdDriveLens
 Driving lens:  25 steps  to infinity
 CCameraProgram: cmdWaitFocusDrive
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 CCameraProgram: cmdWaitFocusDrive
 exec : finishing executing program ' program #3 ', serial =  3
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 exec : begin running program ' program #4 ', serial =  4
 CCameraProgram: cmdSelCamera
 CCameraProgram: cmdDriveLens
 Driving lens:  25 steps  to camera
 CCameraProgram: cmdWaitFocusDrive
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 CCameraProgram: cmdWaitFocusDrive
 exec : finishing executing program ' program #4 ', serial =  4
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 exec : begin running program ' program #5 ', serial =  5
 CCameraProgram: cmdSelCamera
 CCameraProgram: cmdDriveLens
 Driving lens:  5 steps  to infinity
 CCameraProgram: cmdWaitFocusDrive
 CCameraProgram: cmdWaitFocusDrive
 exec : finishing executing program ' program #5 ', serial =  5
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 exec : begin running program ' program #6 ', serial =  6
 CCameraProgram: cmdSelCamera
 CCameraProgram: cmdDriveLens
 Driving lens:  5 steps  to camera
 CCameraProgram: cmdWaitFocusDrive
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 CCameraProgram: cmdWaitFocusDrive
 exec : finishing executing program ' program #6 ', serial =  6
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 zoomLV Setting zoom to  5
 exec : begin running program ' program #7 ', serial =  7
 CCameraProgram: cmdSelCamera
 CCameraProgram: cmdSetZoomPosition
 CCameraProgram: cmdSetZoomPosition
 CCameraProgram: cmdSetZoom
 CCameraProgram: cmdSetZoom
 CCameraProgram: cmdPause
 CCameraProgram: cmdPause
 CCameraProgram: cmdPause
 CCameraProgram: cmdPause
 CCameraProgram: cmdPause
 CCameraProgram: cmdPause
 CCameraProgram: cmdPause
 CCameraProgram: cmdPause
 CCameraProgram: cmdPause
 exec : finishing executing program ' program #7 ', serial =  7
 "Auto Focus " button pressed
 Showing balloon:  Tap the point on image to focus at.
 onApertureChanged
 updateBracketingData . curTv= 39 , curIso= 0
 Shutter speed control: enable =  1
 exec : begin running program ' program #8 ', serial =  8
 CCameraProgram: cmdSelCamera
 CCameraProgram: cmdDriveLens
 Driving lens:  5 steps  to camera
 CCameraProgram: cmdWaitFocusDrive
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 CCameraProgram: cmdWaitFocusDrive
 exec : finishing executing program ' program #8 ', serial =  8
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 
Settings file cannot be read

-------
Didix
 
Posts: 20
Joined: 29.12.2009 12:52

Re: Android v244 - D90 ok, D7000 fail

Unread postby Stas Yatsenko » 18.06.2012 11:28

The current Helicon Remote version is 2.4.5 and you seem to be using 2.4.4, please update and see if it solves the problem.
What do you mean by not being able to upload log file? Any error message?
Unfortunately, D7000 doesn't allow for remote control over MLU.
User avatar
Stas Yatsenko
 
Posts: 2678
Joined: 06.05.2009 14:05

Re: Android v244 - D90 ok, D7000 fail

Unread postby Didix » 18.06.2012 18:25

Thanx, I will try 2.4.5

Stas Yatsenko wrote:What do you mean by not being able to upload log file? Any error message?


I uploaded the text file three times but I never found a hint where it has been uploaded to - no error message - just no uploaded file ..

-Didix
Didix
 
Posts: 20
Joined: 29.12.2009 12:52

Re: Android v244 - D90 ok, D7000 fail

Unread postby Stas Yatsenko » 19.06.2012 14:17

That's the normal behaviour, the reports are sent to our e-mail box.

We are investigating this problem. We will send you test version via email.
User avatar
Stas Yatsenko
 
Posts: 2678
Joined: 06.05.2009 14:05

Re: Android v244 - D90 ok, D7000 fail

Unread postby Didix » 19.06.2012 20:26

Stas Yatsenko wrote:That's the normal behaviour, the reports are sent to our e-mail box.

We are investigating this problem. We will send you test version via email.


Sorry, I think I did not express myself correctly.
I copy and pasted the debug info from Helicon Remote and tried to upload it here in the forum.

-Didix
Didix
 
Posts: 20
Joined: 29.12.2009 12:52

Re: Android v244 - D90 ok, D7000 fail

Unread postby Didix » 24.06.2012 16:45

Hi Stas

I am now using v245.

Everything starts fine:
Liveview comes up and immediately starts autofocusing without pushing the autofocus button.
I can also touch the screen to autofocus at a different position.
But when I press the arrow keys to move the focus, nothing happens.

I have uploaded the logfile here just one minute ago. Did you receive it?

-Didix

PS: D90 behaves correctly.
Didix
 
Posts: 20
Joined: 29.12.2009 12:52

Re: Android v244 - D90 ok, D7000 fail

Unread postby Stas Yatsenko » 25.06.2012 13:34

Please connect the camera, then run Helicon Remote, then go to "menu\Help\Report a bug" and send us a notice from there. This will give us more information.
User avatar
Stas Yatsenko
 
Posts: 2678
Joined: 06.05.2009 14:05

Re: Android v244 - D90 ok, D7000 fail

Unread postby Didix » 25.06.2012 18:41

Stas Yatsenko wrote:Please connect the camera, then run Helicon Remote, then go to "menu\Help\Report a bug" and send us a notice from there. This will give us more information.


Well, that device is not connected to the internet. that's why I tried to upload it here. Unfortunately this seems not to work?
Therefore, I include it again as CODE ..

-Didix

Code: Select all
 HELICON_REMOTE_LOG_START_MAGIC_DUST

 Stopping GPS
 Shutter speed control: enable =  0
 Java code message:  Android version: 19, core version: 2.4.5
 Java code message:  Device: asus Transformer TF101G
 Java code message:  Android platform version: 13
 Java code message:  043c704942ff8457
 Java code message:  Running processes:
 Java code message:  .HeliconRemoteActivity
 Java code message:  com.android.launcher2.Launcher
 Java code message:  com.infraware.filemanager.FmAccountListActivity
 Java code message:  Creating Activity
 Java code message:  Service created
 Java code message:  Starting service
 Java code message:  Activity is stopped
 Java code message:  Found new device: VID = 4b0, PID = 428
 Java code message:  permission granted for device VID = 4b0, PID = 428
 Java code message:  Found new device: VID = 4b0, PID = 428
 open
 requestDeviceInfo
 exec
 open : trying to open ptp device. vendor = 0 , product = 0
 open : OK
 deviceOpened
 Shutter speed control: enable =  0
 openSession
 openSession : trying to open session
 openSession : successfully opened. Vendor = 0 , product = 0
 onAeModeChanged
 itemName  Illegal item ID ffffffff  for ord ffffffff
 itemName  Illegal item ID ffffffff  for ord ffffffff
 onApertureChanged
 updateBracketingData . curTv= -1 , curIso= -1
 onShSpeedChanged
 updateLongest
 updateBracketingData . curTv= -1 , curIso= -1
 onIsoChanged
 updateLongest
 updateBracketingData . curTv= -1 , curIso= -1
 propChanged :  D7000 : AEMode:    (id =  4294967295 )
 itemId Trying to get ID for ImageQuality number  -1 , while only  0  quality combinations exist
 itemId Trying to get ID for ImageQuality number  -1 , while only  0  quality combinations exist
 propChanged :  D7000 : ImageQuality:  UNKNOWN ( id =  4294967295 )
 itemId Trying to get ID for ImageQuality number  0 , while only  0  quality combinations exist
 Shutter speed control: enable =  0
 propChanged :  D7000 : battery level:  60
 Shutter speed control: enable =  0
 propChanged :  D7000 : ImageQuality:  JPEG Basic Small (2464x1632) ( id =  131072 )
 Shutter speed control: enable =  0
 onApertureChanged
 updateBracketingData . curTv= -1 , curIso= -1
 Shutter speed control: enable =  0
 onShSpeedChanged
 updateLongest
 updateBracketingData . curTv= 21 , curIso= -1
 Shutter speed control: enable =  0
 onAeModeChanged
 Live view is available
 propChanged :  D7000 : AEMode:  Program  (id =  2 )
 Shutter speed control: enable =  0
 onIsoChanged
 updateLongest
 updateBracketingData . curTv= 21 , curIso= -1
 Shutter speed control: enable =  0
 Shutter speed control: enable =  0
 Storage info unpacked for storage ID 10001
 Type: 4
Capacity: 30424 MB
Free space: 19883 MB
Free space in images: 21208
Description: NIKON D7000 [Slot 1]
 Storage info unpacked for storage ID 20001
 Type: 4
Capacity: 30424 MB
Free space: 30424 MB
Free space in images: 32452
Description: NIKON D7000 [Slot 2]
 onShSpeedChanged
 updateLongest
 updateBracketingData . curTv= 22 , curIso= -1
 Shutter speed control: enable =  0
 propChanged :  D7000 : battery level:  60
 Shutter speed control: enable =  0
 onShSpeedChanged
 updateLongest
 updateBracketingData . curTv= 21 , curIso= -1
 Shutter speed control: enable =  0
 "Switch LV State" button pressed
 exec : begin running program ' start liveView program ', serial =  2
 CCameraProgram: cmdSelCamera
 CCameraProgram: cmdStartLV
 CCameraProgram: runCmdStartLiveView()
 transactionComplete : ptpTransaction returned error 2019  for operation 90c8
 transactionComplete : ptpTransaction returned error 2019  for operation 90c8
 transactionComplete : ptpTransaction returned error 2019  for operation 90c8
 transactionComplete : ptpTransaction returned error 2019  for operation 90c8
 transactionComplete : ptpTransaction returned error 2019  for operation 90c8
 transactionComplete : ptpTransaction returned error 2019  for operation 90c8
 transactionComplete : ptpTransaction returned error 2019  for operation 90c8
 transactionComplete : ptpTransaction returned error 2019  for operation 90c8
 transactionComplete : ptpTransaction returned error 2019  for operation 90c8
 transactionComplete : ptpTransaction returned error 2019  for operation 90c8
 CCameraProgram: cmdStartLV
 CCameraProgram: cmdPause
 CCameraProgram: cmdPause
 CCameraProgram: cmdPause
 CCameraProgram: cmdPause
 exec : finishing executing program ' start liveView program ', serial =  2
 onShSpeedChanged
 updateLongest
 updateBracketingData . curTv= 20 , curIso= -1
 Shutter speed control: enable =  0
 Nearest point set
 exec : begin running program ' program #3 ', serial =  3
 CCameraProgram: cmdSelCamera
 CCameraProgram: cmdDriveLens
 Driving lens:  5 steps  to infinity
 CCameraProgram: cmdWaitFocusDrive
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 CCameraProgram: cmdWaitFocusDrive
 exec : finishing executing program ' program #3 ', serial =  3
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 exec : begin running program ' program #4 ', serial =  4
 CCameraProgram: cmdSelCamera
 CCameraProgram: cmdDriveLens
 Driving lens:  1 steps  to camera
 CCameraProgram: cmdWaitFocusDrive
 CCameraProgram: cmdWaitFocusDrive
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 CCameraProgram: cmdWaitFocusDrive
 exec : finishing executing program ' program #4 ', serial =  4
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error 2019  for operation 9204
 error executing command. err =  -11
 transactionComplete : ptpTransaction returned error a00b  for operation 9203
 transactionComplete : ptpTransaction returned error a00b  for operation 9203
 transactionComplete : ptpTransaction returned error a00b  for operation 9203
 transactionComplete : ptpTransaction returned error a00b  for operation 9203
 transactionComplete : ptpTransaction returned error a00b  for operation 9203
 transactionComplete : ptpTransaction returned error a00b  for operation 9203
 transactionComplete : ptpTransaction returned error a00b  for operation 9203
 transactionComplete : ptpTransaction returned error a00b  for operation 9203
 transactionComplete : ptpTransaction returned error a00b  for operation 9203
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 9203
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 9203
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 9203
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 9203
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 9203
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 9203
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 ptpTransaction  Error sending ptp transaction
 transactionComplete : ptpTransaction returned error fff3  for operation 90c7
 error executing command. err =  -1
 Shutter speed control: enable =  0
 Shutter speed control: enable =  0
 Java code message:  Activity is stopped
 Java code message:  Activity is stopped
 Java code message:  Activity is stopped
 


<?xml version="1.0" encoding="utf-8" ?>
<HeliconRemote2 ver="1.0">
    <value name="Preferences/General/FolderNaming/Value" value="[year4].[month].[day]_[counter]" />
    <value name="Preferences/General/ParentFolder" value="/mnt/sdcard/Pictures" />
</HeliconRemote2>

Didix
 
Posts: 20
Joined: 29.12.2009 12:52

Re: Android v244 - D90 ok, D7000 fail

Unread postby Stas Yatsenko » 26.06.2012 13:16

Please reset your camera body settings and see if it helps.
User avatar
Stas Yatsenko
 
Posts: 2678
Joined: 06.05.2009 14:05

Re: Android v244 - D90 ok, D7000 fail

Unread postby Didix » 26.06.2012 21:25

Stas Yatsenko wrote:Please reset your camera body settings and see if it helps.


Hmm, to be sure what we are talking about ..

Do you mean:

a) Helicon remote | Settings | Restore page defaults

b) D7000 Camera Body : Reset Shooting Menu (Manual p. 202) : Press the menu button | Shooting menu | Reset shooting menu | Yes
c) D7000 Camera Body : Reset Custom Settings (manual p. 206) : Press the menu button | Custom setting menu | Reset Custom Setting | Yes
d) D7000 Camera Body : Other Shooting options (Manual p. 151) : Restoring Default Settings (by pressing the two buttons with the green point on the body)

-Didix
Didix
 
Posts: 20
Joined: 29.12.2009 12:52

Re: Android v244 - D90 ok, D7000 fail

Unread postby Stas Yatsenko » 27.06.2012 12:13

I mean b), c) and d), unless you have some valuable settings there you don't want to lose. We're not sure it'll help, but we've had a similar case in the past and it did help. We also don't know which setting caused weird behaviour so recommend resetting everything.
User avatar
Stas Yatsenko
 
Posts: 2678
Joined: 06.05.2009 14:05

Re: Android v244 - D90 ok, D7000 fail

Unread postby Didix » 27.06.2012 19:24

Stas Yatsenko wrote:I mean b), c) and d), unless you have some valuable settings there you don't want to lose. We're not sure it'll help, but we've had a similar case in the past and it did help. We also don't know which setting caused weird behaviour so recommend resetting everything.


Yeah, I got a LOT of customization I do not want to lose!
That's why I was hesitating first.

Fortunately, I found a useful gadget of the D7000:
Manual p 244: Save/Load Settings in the setup menu :-)

After Saving the settings I resetted with option d)
Now it works as suggested !!
On my Asus Transformer with HR245 as well as on my
Samsung Galaxy SII & Android 403 & HR251 :-) :-) :-)

If one of you guys out there knows, what setting is responsible for handicaping HR - please let us know!

@Stas: Thanx a lot for support!

-Didix
Didix
 
Posts: 20
Joined: 29.12.2009 12:52

Re: Android v244 - D90 ok, D7000 fail

Unread postby Stas Yatsenko » 29.06.2012 12:34

Great to hear the problem is solved, thanks for the information. Unfortunately, we have no idea which setting is the culprit, otherwise we wouldn't ask you to reset everything. We don't have a D7000 so we can't find it out ourselves.
User avatar
Stas Yatsenko
 
Posts: 2678
Joined: 06.05.2009 14:05

Re: Android v244 - D90 ok, D7000 fail

Unread postby Didix » 10.05.2013 08:34

Do we meanwhile know which setting on the D7000 is blocking the arrow buttons to work?

-Didix
Didix
 
Posts: 20
Joined: 29.12.2009 12:52

Re: Android v244 - D90 ok, D7000 fail

Unread postby Stas Yatsenko » 10.05.2013 14:43

Yes, we've found it out recently. It's AF mode in live view. It can only be accessed while LV is active, it's not the same as regular AF mode. Should be AF-S or Remote won't work.
User avatar
Stas Yatsenko
 
Posts: 2678
Joined: 06.05.2009 14:05

Next

Return to Helicon Remote

Who is online

Users browsing this forum: No registered users and 3 guests

cron