Page 1 of 1

d90...

Posted: 04.11.2009 02:43
by chaos1
my d90 is not found on helicon remote :cry:

win7 x64

cheers,klaus

D90

Posted: 04.11.2009 21:34
by kent1952
Focus is not finding my D90 either.

Win 7 32bit

Kent

D90 - correction

Posted: 04.11.2009 21:35
by kent1952
Sorry that should be Remote not Focus is not recognizing my D90

Kent

Posted: 05.11.2009 17:12
by Stas Yatsenko
Please send us (Yatsenko.Stas@gmail.com) remote_control.log from the Helicon Focus folder. It will help us to understand why D90 is not detected.

"USB mass storage" mode

Posted: 09.11.2009 14:20
by Stas Yatsenko
We found that the program does not detect the camera if you use "USB mass storage" mode in your camera. Please switch to PTP instead of USB mode, this should help.

d90-ptpmode

Posted: 09.11.2009 15:51
by chaos1
thx for the fast reply, but the d90 should already be in ptp-mode! found no way to switch between usb and ptp.
from another forum:

Here is the response from Nikon. "Thank you for emailing us. Again we apologize but the D90 does not act as a mass storage device while connected to your computer as the only transfer modes available are PTP/MTP. Because the camera does not act as a Mass Storage Mode you will not be able to view the camera the same way you are able to with the D80"

cheers,klaus

Posted: 16.11.2009 15:20
by Stas Yatsenko
We still cannot get D90 for tests, so no updates so far. We will release new version with newer dlls, maybe this will help.

Posted: 17.11.2009 17:19
by Stas Yatsenko
Please use this test programs (http://downloads.heliconfilter.com/Niko ... ograms.zip) to detect your Nikon cameras. Run the program and press "1". The utility will report if the camera is detected or not. If this Nikon sample program is able to detect the camera, we will be able to do it as well.

d90...

Posted: 18.11.2009 00:51
by chaos1
no source object found :cry:

cheers,klaus

Posted: 19.11.2009 14:00
by Stas Yatsenko

Posted: 19.11.2009 22:40
by chaos1
stas,

it works with nkremote and camera-control pro2!
it did not work with camera-control pro2.0, but is fine with version 2.6(the latest update)!

cheers,klaus

Posted: 24.11.2009 14:40
by Stas Yatsenko
Klaus,

Thanks, we will update Helicon Remote with the newest libraries that comes with 2.6 version. Strange, but Nikon still have old modules on their site for developers.

Re: d90...

Posted: 14.12.2009 20:30
by chaos1
now it works, thanks!

klaus

Re: d90...

Posted: 25.12.2009 03:38
by tedmozer
Just discovered and install this interesting software suite. Sweet! The remote program worked without a hitch with my Nikon D90. I did some macro shots of seashells sitting on the desk next to my computer. The software has a lot of promise.

I was, however, confused as to the best setting for both my D90 and the 60mm Nikkor Micro (macro) lens I was using. What are the suggested settings for both please?

Re: d90...

Posted: 05.01.2010 12:14
by Stas Yatsenko
DOF Calculator in the Helicon Remote will give you number of steps between shots for a given aperture (f5.6-8 gives max resolution), if you mean these settings. But please note that you may need to correct this value according to your lens.