Before stack: Image looks fine. After Stack way over saturated

Announcement of new releases, bugs, support, suggestions

Moderator: Stas Yatsenko

Post Reply
mirzaboric
Posts: 1
Joined: 08.09.2018 16:31

Before stack: Image looks fine. After Stack way over saturated

Post by mirzaboric » 08.09.2018 17:09

I took images in Helicon focus and they all came out perfect. I imported into helicon focus and they still looked good (Left hand side)

Once I ran the stack the color was blown out.

Image

I attached the image for reference.

What is causing this?

BobStone
Posts: 27
Joined: 03.06.2017 10:13

Re: Before stack: Image looks fine. After Stack way over saturated

Post by BobStone » 09.09.2018 11:05

Looks like you have both jpg and cr2 (raw) files in your stack. Try with just jpg or cr2.

el48tel
Posts: 21
Joined: 22.06.2016 16:05

Re: Before stack: Image looks fine. After Stack way over saturated

Post by el48tel » 09.09.2018 11:32

I'd suggest the CR2 files only - JPG files have had a considerable amount of pre-processing of their own - if you use LightRoom and can use the Raw-in-DNG-out method, you'll get greater control of the final output because the processing on a DNG is like processing a RAW

Post Reply