Helicon Soft Forum

by **Senor Mule** » 26.05.2013 16:27

Stas Yatsenko wrote:Yes, we've found it out recently. It's AF mode in live view. It can only be accessed while LV is active, it's not the same as regular AF mode. Should be AF-S or Remote won't work.

The same exists in the D800 series, and I imagine the D600s as well (which is a cut down version of the same command sets) and others like D3/D4.
It is on the Nikon settings side, as stated above,there are different control sets for AF and LV.
LV is used for bulb and really long exposures (>1 minute) which will shut out the eyepiece anyway. The earlier digital cameras didn't do this as most film shooters were used to eye piece and they left this enabled and you could only review post shot on the lcd. Nikon explained they segregated this to incorporate the additional features such as focus tracking and primarily face tracking, which could not be displayed properly on the eyepiece lcd - my old canon rebel could show little boxes on the faces

.
There is a write-up on the Nikon site regarding using face tracking in LV that addresses this issue in a roundabout way, as well as the alternate control settings and their reasons (which they state are "additional features" for improved functioning - which was clearly written by their PR/advertisement group) .

Hope this helped.

by **Stas Yatsenko** » 13.05.2013 15:45

Hm. Thanks for the info. Apparently, there's another setting that leads to the same problem. No idea which setting it might be.

by **Didix** » 12.05.2013 07:50

Stas Yatsenko wrote:Yes, we've found it out recently. It's AF mode in live view. It can only be accessed while LV is active, it's not the same as regular AF mode. Should be AF-S or Remote won't work.

Thanx !!

Hmm, just tried it.
When I do not reset my settings, but only change the AF mode to AF-S, the arrow keys still do not work on my D7000.

-Didix

by **Stas Yatsenko** » 10.05.2013 14:43

Yes, we've found it out recently. It's AF mode in live view. It can only be accessed while LV is active, it's not the same as regular AF mode. Should be AF-S or Remote won't work.

by **Didix** » 10.05.2013 08:34

Do we meanwhile know which setting on the D7000 is blocking the arrow buttons to work?

-Didix

by **Stas Yatsenko** » 29.06.2012 12:34

Great to hear the problem is solved, thanks for the information. Unfortunately, we have no idea which setting is the culprit, otherwise we wouldn't ask you to reset everything. We don't have a D7000 so we can't find it out ourselves.

by **Didix** » 27.06.2012 19:24

Stas Yatsenko wrote:I mean b), c) and d), unless you have some valuable settings there you don't want to lose. We're not sure it'll help, but we've had a similar case in the past and it did help. We also don't know which setting caused weird behaviour so recommend resetting everything.

Yeah, I got a LOT of customization I do not want to lose!
That's why I was hesitating first.

Fortunately, I found a useful gadget of the D7000:
Manual p 244: Save/Load Settings in the setup menu :-)

After Saving the settings I resetted with option d)
Now it works as suggested !!
On my Asus Transformer with HR245 as well as on my
Samsung Galaxy SII & Android 403 & HR251 :-)

If one of you guys out there knows, what setting is responsible for handicaping HR - please let us know!

@Stas: Thanx a lot for support!

-Didix

by **Stas Yatsenko** » 27.06.2012 12:13

I mean b), c) and d), unless you have some valuable settings there you don't want to lose. We're not sure it'll help, but we've had a similar case in the past and it did help. We also don't know which setting caused weird behaviour so recommend resetting everything.

by **Didix** » 26.06.2012 21:25

Stas Yatsenko wrote:Please reset your camera body settings and see if it helps.

Hmm, to be sure what we are talking about ..

Do you mean:

a) Helicon remote | Settings | Restore page defaults

b) D7000 Camera Body : Reset Shooting Menu (Manual p. 202) : Press the menu button | Shooting menu | Reset shooting menu | Yes
c) D7000 Camera Body : Reset Custom Settings (manual p. 206) : Press the menu button | Custom setting menu | Reset Custom Setting | Yes
d) D7000 Camera Body : Other Shooting options (Manual p. 151) : Restoring Default Settings (by pressing the two buttons with the green point on the body)

-Didix

by **Stas Yatsenko** » 26.06.2012 13:16

Please reset your camera body settings and see if it helps.

by **Didix** » 25.06.2012 18:41

Stas Yatsenko wrote:Please connect the camera, then run Helicon Remote, then go to "menu\Help\Report a bug" and send us a notice from there. This will give us more information.

Well, that device is not connected to the internet. that's why I tried to upload it here. Unfortunately this seems not to work?
Therefore, I include it again as CODE ..

-Didix

Code: Select all: HELICON_REMOTE_LOG_START_MAGIC_DUST Stopping GPS Shutter speed control: enable = 0 Java code message: Android version: 19, core version: 2.4.5 Java code message: Device: asus Transformer TF101G Java code message: Android platform version: 13 Java code message: 043c704942ff8457 Java code message: Running processes: Java code message: .HeliconRemoteActivity Java code message: com.android.launcher2.Launcher Java code message: com.infraware.filemanager.FmAccountListActivity Java code message: Creating Activity Java code message: Service created Java code message: Starting service Java code message: Activity is stopped Java code message: Found new device: VID = 4b0, PID = 428 Java code message: permission granted for device VID = 4b0, PID = 428 Java code message: Found new device: VID = 4b0, PID = 428 open requestDeviceInfo exec open : trying to open ptp device. vendor = 0 , product = 0 open : OK deviceOpened Shutter speed control: enable = 0 openSession openSession : trying to open session openSession : successfully opened. Vendor = 0 , product = 0 onAeModeChanged itemName Illegal item ID ffffffff for ord ffffffff itemName Illegal item ID ffffffff for ord ffffffff onApertureChanged updateBracketingData . curTv= -1 , curIso= -1 onShSpeedChanged updateLongest updateBracketingData . curTv= -1 , curIso= -1 onIsoChanged updateLongest updateBracketingData . curTv= -1 , curIso= -1 propChanged : D7000 : AEMode: (id = 4294967295 ) itemId Trying to get ID for ImageQuality number -1 , while only 0 quality combinations exist itemId Trying to get ID for ImageQuality number -1 , while only 0 quality combinations exist propChanged : D7000 : ImageQuality: UNKNOWN ( id = 4294967295 ) itemId Trying to get ID for ImageQuality number 0 , while only 0 quality combinations exist Shutter speed control: enable = 0 propChanged : D7000 : battery level: 60 Shutter speed control: enable = 0 propChanged : D7000 : ImageQuality: JPEG Basic Small (2464x1632) ( id = 131072 ) Shutter speed control: enable = 0 onApertureChanged updateBracketingData . curTv= -1 , curIso= -1 Shutter speed control: enable = 0 onShSpeedChanged updateLongest updateBracketingData . curTv= 21 , curIso= -1 Shutter speed control: enable = 0 onAeModeChanged Live view is available propChanged : D7000 : AEMode: Program (id = 2 ) Shutter speed control: enable = 0 onIsoChanged updateLongest updateBracketingData . curTv= 21 , curIso= -1 Shutter speed control: enable = 0 Shutter speed control: enable = 0 Storage info unpacked for storage ID 10001 Type: 4 Capacity: 30424 MB Free space: 19883 MB Free space in images: 21208 Description: NIKON D7000 [Slot 1] Storage info unpacked for storage ID 20001 Type: 4 Capacity: 30424 MB Free space: 30424 MB Free space in images: 32452 Description: NIKON D7000 [Slot 2] onShSpeedChanged updateLongest updateBracketingData . curTv= 22 , curIso= -1 Shutter speed control: enable = 0 propChanged : D7000 : battery level: 60 Shutter speed control: enable = 0 onShSpeedChanged updateLongest updateBracketingData . curTv= 21 , curIso= -1 Shutter speed control: enable = 0 "Switch LV State" button pressed exec : begin running program ' start liveView program ', serial = 2 CCameraProgram: cmdSelCamera CCameraProgram: cmdStartLV CCameraProgram: runCmdStartLiveView() transactionComplete : ptpTransaction returned error 2019 for operation 90c8 transactionComplete : ptpTransaction returned error 2019 for operation 90c8 transactionComplete : ptpTransaction returned error 2019 for operation 90c8 transactionComplete : ptpTransaction returned error 2019 for operation 90c8 transactionComplete : ptpTransaction returned error 2019 for operation 90c8 transactionComplete : ptpTransaction returned error 2019 for operation 90c8 transactionComplete : ptpTransaction returned error 2019 for operation 90c8 transactionComplete : ptpTransaction returned error 2019 for operation 90c8 transactionComplete : ptpTransaction returned error 2019 for operation 90c8 transactionComplete : ptpTransaction returned error 2019 for operation 90c8 CCameraProgram: cmdStartLV CCameraProgram: cmdPause CCameraProgram: cmdPause CCameraProgram: cmdPause CCameraProgram: cmdPause exec : finishing executing program ' start liveView program ', serial = 2 onShSpeedChanged updateLongest updateBracketingData . curTv= 20 , curIso= -1 Shutter speed control: enable = 0 Nearest point set exec : begin running program ' program #3 ', serial = 3 CCameraProgram: cmdSelCamera CCameraProgram: cmdDriveLens Driving lens: 5 steps to infinity CCameraProgram: cmdWaitFocusDrive transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 CCameraProgram: cmdWaitFocusDrive exec : finishing executing program ' program #3 ', serial = 3 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 exec : begin running program ' program #4 ', serial = 4 CCameraProgram: cmdSelCamera CCameraProgram: cmdDriveLens Driving lens: 1 steps to camera CCameraProgram: cmdWaitFocusDrive CCameraProgram: cmdWaitFocusDrive transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 CCameraProgram: cmdWaitFocusDrive exec : finishing executing program ' program #4 ', serial = 4 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error 2019 for operation 9204 error executing command. err = -11 transactionComplete : ptpTransaction returned error a00b for operation 9203 transactionComplete : ptpTransaction returned error a00b for operation 9203 transactionComplete : ptpTransaction returned error a00b for operation 9203 transactionComplete : ptpTransaction returned error a00b for operation 9203 transactionComplete : ptpTransaction returned error a00b for operation 9203 transactionComplete : ptpTransaction returned error a00b for operation 9203 transactionComplete : ptpTransaction returned error a00b for operation 9203 transactionComplete : ptpTransaction returned error a00b for operation 9203 transactionComplete : ptpTransaction returned error a00b for operation 9203 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 9203 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 9203 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 9203 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 9203 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 9203 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 9203 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 ptpTransaction Error sending ptp transaction transactionComplete : ptpTransaction returned error fff3 for operation 90c7 error executing command. err = -1 Shutter speed control: enable = 0 Shutter speed control: enable = 0 Java code message: Activity is stopped Java code message: Activity is stopped Java code message: Activity is stopped <?xml version="1.0" encoding="utf-8" ?> <HeliconRemote2 ver="1.0"> <value name="Preferences/General/FolderNaming/Value" value="[year4].[month].[day]_[counter]" /> <value name="Preferences/General/ParentFolder" value="/mnt/sdcard/Pictures" /> </HeliconRemote2>

by **Stas Yatsenko** » 25.06.2012 13:34

Please connect the camera, then run Helicon Remote, then go to "menu\Help\Report a bug" and send us a notice from there. This will give us more information.

by **Didix** » 24.06.2012 16:45

Hi Stas

I am now using v245.

Everything starts fine:
Liveview comes up and immediately starts autofocusing without pushing the autofocus button.
I can also touch the screen to autofocus at a different position.
But when I press the arrow keys to move the focus, nothing happens.

I have uploaded the logfile here just one minute ago. Did you receive it?

-Didix

PS: D90 behaves correctly.

by **Didix** » 19.06.2012 20:26

Stas Yatsenko wrote:That's the normal behaviour, the reports are sent to our e-mail box.

We are investigating this problem. We will send you test version via email.

Sorry, I think I did not express myself correctly.
I copy and pasted the debug info from Helicon Remote and tried to upload it here in the forum.

-Didix

by **Stas Yatsenko** » 19.06.2012 14:17

That's the normal behaviour, the reports are sent to our e-mail box.

We are investigating this problem. We will send you test version via email.

Helicon Soft Forum

Android v244 - D90 ok, D7000 fail

Post a reply

Expand view Topic review: Android v244 - D90 ok, D7000 fail

Re: Android v244 - D90 ok, D7000 fail

Re: Android v244 - D90 ok, D7000 fail

Re: Android v244 - D90 ok, D7000 fail

Re: Android v244 - D90 ok, D7000 fail

Re: Android v244 - D90 ok, D7000 fail

Re: Android v244 - D90 ok, D7000 fail

Re: Android v244 - D90 ok, D7000 fail

Re: Android v244 - D90 ok, D7000 fail

Re: Android v244 - D90 ok, D7000 fail

Re: Android v244 - D90 ok, D7000 fail

Re: Android v244 - D90 ok, D7000 fail

Re: Android v244 - D90 ok, D7000 fail

Re: Android v244 - D90 ok, D7000 fail

Re: Android v244 - D90 ok, D7000 fail

Re: Android v244 - D90 ok, D7000 fail